LithiumLogic™ 24V (Max 29.2V) 30A battery charger with SB50 plug

This 24V 30A LiFePO4 charger feels like a serious piece of equipment rather than a basic battery charger. The aluminum housing is rugged, the included Anderson connector and accessories make setup easier, and the charging performance is strong for larger 24V battery systems. It is especially well suited for equipment like forklifts, pallet jacks, floor scrubbers, utility carts, and other commercial or industrial applications.The charger runs efficiently, charges quickly, and includes useful safety features such as temperature monitoring, battery recovery functions, and multiple protection circuits. The IP67-rated design is another plus for anyone using it in garages, workshops, barns, or outdoor environments where dust and moisture can be a concern.A couple things to keep in mind: this is a 30-amp charger, so it is intended for appropriately sized 24V LiFePO4 battery banks, and buyers should verify connector compatibility before ordering. Additional adapter options would be helpful for some setups. Overall, this is a well-built charger that delivers fast charging, solid protection features, and dependable performance for larger 24V lithium systems.

This charger delivers dependable performance without unnecessary premium markup. The construction feels solid throughout, and it handles repeated charge cycles on industrial equipment without hesitation. The waterproof design held up well in actual shop conditions, and the temperature sensor keeps things safe even during back-to-back charging runs.The value here is genuinely strong. I expected to spend considerably more for a charger with this level of build quality and the included accessories like the Anderson plug and sensor cable. Instead, it's a straightforward solution that does exactly what it's supposed to do and leaves money left over. Perfect for fleet operators and maintenance teams who need reliable charging without paying for features they'll never use.

The charger feels extremely well-built right out of the box, and the included SB50 Anderson plug, accessory wires, and temperature sensor made installation straightforward.One of the standout features is the IP67 waterproof rating. Our equipment is used in demanding warehouse and outdoor environments, so having a charger that can handle dust, moisture, and occasional splashes provides real peace of mind. The 30A charging output delivers a good balance of charging speed and battery protection, bringing our LiFePO4 batteries back to full charge efficiently.It successfully recovered a battery that had been discharged lower than recommended, saving us from what could have been an expensive replacement. The charger operates quietly, stays relatively cool during operation, and the built-in safety features inspire confidence when charging unattended.

This is a very well built battery charger.Lots of power to spare at 30 amps.My two series connected 12v 100ah LiFePO4 are very happy to take a charge from this charger!I also have a 24v mobility scooter but, there is no way to connect with the included connectors.Which is probably a good thing because a 30 amp charger should not be used on 20ah or less batteries unless the BMS states otherwise.I wish there was a better selection of Anderson adaptors for my other applications but, I can make do with what I find here on Amazon.I don't like dedicating a charger or even a solar component to a single device or application.This charger does in fact charge my 100AH pair very quickly and efficiently.I wish they would offer a 12vdc version to me!A selectable amperage switch would be great too on ALL voltage versions of these chargers.This one gets warm but, not hot. The fan runs to help keep the heatsink style case temperature down.It is very water resistant which is very important when used outside.I hope it lasts a long time. If it does, this charger will be a good value.

This 24V 30A LiFePO4 charger is a bit of a mixed bag. The charger itself feels solid, the main cables are heavy enough (although they are not marked with a AWG gauge), and it has been able to charge two of my 12V LiFePO4 batteries connected in series. For basic charging, it does work.That said, some of the details feel rough for a retail product. The alligator clips look a bit cheap, the cooling fan placement is... just odd, and there is a small tie wrap around the Anderson-style connector that makes it feel more like a prototype than a finished production unit. The listing describes it as a 24V 30A LiFePO4 charger with an SB50 Anderson plug, accessory wires, temp sensor, IP67 waterproof housing, and 29.2V output.The connectors are labeled Anderson, but they do not feel like my genuine Anderson connectors. I also noticed the Anderson marking appears to be missing the registered trademark in one place, so I suspect these may be clone connectors rather than genuine Anderson parts (not 100% sure, but likely).Overall, the charger works and the main body seems well built, but the accessories and finishing details are not as polished. At this price, I would like to see better quality control and more confidence that the connectors are genuine.